Dashcams

Chevy Spark EV Forum

Help Support Chevy Spark EV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fr100

Active member
Joined
Dec 13, 2015
Messages
27
Has anyone added a hardwired dashcam yet? I plan on using an add-a-fuse to hardwire it to the driver's side fuse box. Can I remove the A pillar trim easily?
 
I haven't investigated much, but you might consider piggybacking on the wire harness that already runs to the overhead if you want power at the top of the windshield (depending on the electric requirements of your dash cam).

Bryce
 
Trim isn't too hard to remove. Fuse panel is below at the knee.

I ran some wires down there and used a tap in fuse for my autodim mirror.
 
Friendly Warning:

Do not wrap the dashcam wire around the A-pillar to get from the windscreen to the door seal (as shown in some dashcam installation videos). Doing so blocks the side impact airbag. Here's a video of the side impact airbag deploying.
 
Back
Top