Planerench
Well-known member
Curious if I could fit a smaller wheel, perhaps a 13", to the front to increase the effective ratio at the wheel? I have not measured the clearance of the brake caliper to the inside diameter of the rim. I know off-set clearance is an issue. I am also searching to obtain a 2015-16 gear-set to test. I am not as concerned about power off the line as that 30-50 MPH stretch. Sticky compound and a lower ratio would be interesting. If the motor hit its limit around 80 MPH I could live with that as long as the mid-high range improved. I'm probably dreaming. Ok I know I am dreaming....