cichaelmhan
Posts: 3
Joined: Fri May 22, 2020 1:01 pm

Square Setup for Aftermarket Wheels

Fri May 22, 2020 1:05 pm

Hi,
Looking to buy aftermarket wheels in a square set up for my 2015. I've read the threads on here about others buying new wheels, and the main concern I have is if the ones I'm looking at will clear the front brake calipers. So far I haven't seen anyone use 15x6.5 et42 or 15x6.5 et40, so if anyone has some insight I'd appreciate it greatly!

Chris101
Posts: 117
Joined: Thu Jan 18, 2018 11:37 am

Re: Square Setup for Aftermarket Wheels

Sat May 23, 2020 5:10 am

Yes, I had 15x7 ET35 with 205 50 15 on my former 2014 Spark EV.. worked great!

jabe
Posts: 12
Joined: Thu Nov 21, 2019 6:07 pm

Re: Square Setup for Aftermarket Wheels

Tue Jul 07, 2020 7:17 am

cichaelmhan wrote:
Fri May 22, 2020 1:05 pm
Hi,
Looking to buy aftermarket wheels in a square set up for my 2015. I've read the threads on here about others buying new wheels, and the main concern I have is if the ones I'm looking at will clear the front brake calipers. So far I haven't seen anyone use 15x6.5 et42 or 15x6.5 et40, so if anyone has some insight I'd appreciate it greatly!
any luck with the set up? looking into rims for my '16 but finding it tough to commit to a set not knowing they will fit.

cichaelmhan
Posts: 3
Joined: Fri May 22, 2020 1:01 pm

Re: Square Setup for Aftermarket Wheels

Tue Jul 07, 2020 9:03 am

jabe wrote:
Tue Jul 07, 2020 7:17 am

any luck with the set up? looking into rims for my '16 but finding it tough to commit to a set not knowing they will fit.
I ended up going with 15 x 6.5 et 40 with the tires being 195/55/15 all around. So far its been amazing having a bit of extra grip in the front end compared to stock wheels, however I’ve noticed theres very slight rubbing when full lock on an extreme uphill angle. This has only happened once though, daily driving this set up has been great.

jabe
Posts: 12
Joined: Thu Nov 21, 2019 6:07 pm

Re: Square Setup for Aftermarket Wheels

Tue Jul 07, 2020 10:51 am

cichaelmhan wrote:
Tue Jul 07, 2020 9:03 am
jabe wrote:
Tue Jul 07, 2020 7:17 am

any luck with the set up? looking into rims for my '16 but finding it tough to commit to a set not knowing they will fit.
I ended up going with 15 x 6.5 et 40 with the tires being 195/55/15 all around. So far its been amazing having a bit of extra grip in the front end compared to stock wheels, however I’ve noticed theres very slight rubbing when full lock on an extreme uphill angle. This has only happened once though, daily driving this set up has been great.
thanks.. not 100% sure what you mean by "full lock on extreme uphill".
.this will make my hunting easier... still on winters on oem rims (yeah I know bad me...hardly been driving so not much wear on them but this heat ain't good for them..)...so may keep them as is and new rims my summer tires :)
jb

cichaelmhan
Posts: 3
Joined: Fri May 22, 2020 1:01 pm

Re: Square Setup for Aftermarket Wheels

Tue Jul 07, 2020 11:31 am

jabe wrote:
Tue Jul 07, 2020 10:51 am
cichaelmhan wrote:
Tue Jul 07, 2020 9:03 am
jabe wrote:
Tue Jul 07, 2020 7:17 am

any luck with the set up? looking into rims for my '16 but finding it tough to commit to a set not knowing they will fit.
I ended up going with 15 x 6.5 et 40 with the tires being 195/55/15 all around. So far its been amazing having a bit of extra grip in the front end compared to stock wheels, however I’ve noticed theres very slight rubbing when full lock on an extreme uphill angle. This has only happened once though, daily driving this set up has been great.
thanks.. not 100% sure what you mean by "full lock on extreme uphill".
.this will make my hunting easier... still on winters on oem rims (yeah I know bad me...hardly been driving so not much wear on them but this heat ain't good for them..)...so may keep them as is and new rims my summer tires :)
jb
Sorry, i meant like if you’re on a hill and going upwards at a steep angle and the steering wheel is fully on one side (full lock) there is slight rubbing.

jabe
Posts: 12
Joined: Thu Nov 21, 2019 6:07 pm

Re: Square Setup for Aftermarket Wheels

Tue Jul 07, 2020 12:50 pm

cichaelmhan wrote:
Tue Jul 07, 2020 11:31 am

Sorry, i meant like if you’re on a hill and going upwards at a steep angle and the steering wheel is fully on one side (full lock) there is slight rubbing.
thanks for clarification... made searching so much easier.
jb

Return to “Modifications & Accessories”