oldirtyewok
Posts: 1
Joined: Tue Sep 15, 2020 8:39 pm

Re: Jack points and tire rotation

Wed Sep 16, 2020 6:04 pm

an7mal wrote:
Thu Sep 03, 2020 6:41 am
You can lift two wheels on the same side at one time with one jack:
https://photos.google.com/photo/AF1QipM ... sXxiQFWg7y
Jacking from the front, both the front and rear wheel will come up and allow you to place jack stands.

https://photos.google.com/photo/AF1QipN ... 8Kp8OAB2hS
Front Jack point, thick sheet metal with hole (just inside the crimped seam).

WIth 2x4 pad on jack in the front:
https://photos.google.com/photo/AF1QipN ... FYVZxnSRwx.

You can then put jack stands under the a-arm pivot or under the plastic shield near where the a-arms attach (use pads for the latter).

Rear jack point is also just inside the body seam crimp:
https://photos.google.com/photo/AF1QipP ... gdtIUlv5ij
You can see the jack stand in the same photo under the axle. Alternative place for a rear jack stand would be under the trailing arm pivot or the jack pad.
Would you mind posting those pics up again? Links seem to be broken! Thank you!

Return to “General / Main Owners Forum”